Expert Plumbing Tips To Keep Your Bathroom In Good Shape

One of the most used rooms in the house is the bathroom. It’s where we take a bath, shower, and do other cleaning rituals. That is why routine maintenance is considered vital, and knowing some tips to keep your bathroom in good shape will come in handy anytime.

Tips You Should Know

Below are several tips that will keep your bathroom plumbing away from troubles:


If you have noticed a low or weak water pressure, it might be time to maintain your plumbing. This problem is most common in older homes and will most likely happen because of corrosion, leaky pipe, buildup in the showerhead, or underperforming water heater.

  • Clogs
    If you see that the water is slow to drain out of your tub or sink, then you have a clog. The best way to solve this is to unclog a shower drain. However, some clogs can be really stubborn. In fact, most people contact professional plumbers to fix this kind of problem.


Your toilet will most likely be one of the most significant sources of leaks in our bathroom.

  • Repair Toilet Leaks
    Whether it is a slow leak or a running toilet, it is not good to let the water flow. For you to check on leaks, consider adding a few drops of coloring to your toilet’s tank. Wait for about 30 minutes and check if you can see any coloring seeped into the toilet bowl. If so, you obviously got a leak to fix. Flush the toilet as soon as you can to avoid the color from staining, and call your plumber for an easy fix.
  • Check Toilet Level
    To make sure that the water does not rise above your toilet’s overflow pipe, check its water level. You can do this by searching for the pipe in the middle of your toilet’s water tank. It has a piece of tubing that is connected to it.
  • Don’t flush trash
    Your toilet is not a trash can. The only thing allowed to be flushed in your toilet should be toilet paper. It is best not to throw any other things like face tissues, wet wipes, sanitary pads, etc. These things can easily block the pipes, which will cause a major plumbing problem.


Unlike the other parts of your plumbing system, faucets are built with some moving parts.

  • Repair Leaks
    You can easily ignore a tiny drip of water from the sink. However, according to the US Environmental Protection Agency (EPA), a leaky faucet that does one drip every second can waste about 3,000 gallons of water per year. That can amount to 180 showers. Hence, it is best not to ignore having a leaky faucet; fix it immediately.
  • Keep Things Tight
    As mentioned earlier, faucets have several moving parts. These parts can actually be worn down quickly. That is why you might need to replace worn pieces or tighten some things up.
  • Clean Aerators
    Aerators are the slight covering found on your faucet that can let air and water combine pass through smoothly. Oftentimes, they can get clogged by lime or sediment buildup. If this is the case, you can easily fix the problem by cleaning the aerators.

Routine Maintenance and Drain Cleaning

Drain cleaning is a maintenance and preventive service that can help your bathroom plumbing stay in good shape. Cleaning using some expert tools can remove drain buildups. This will not just prevent clogs, but it can also help stop pipe decay. Furthermore, your local plumber can also spot hidden leaks or components that might need some repair or replacement during drain cleaning.

Home Plumbing Project You Can Do Yourself

DIY home plumbing project

The following are some ideas you can use if you want to do a DIY home plumbing project:

Consider Adding Pipe Insulation

When it comes to preserving water warmth in the supply pipes, foam pipe insulation is the key. If you install pipe insulation, you will waste less water while waiting for the warm or hot water to be released the next time you withdraw water from your shower, sink, or tub.

Install or Replace a Garbage Disposer

When it comes to installing or replacing a garbage disposer, heavy-lifting is one of the challenges. This unit can weigh about 10 to 15 pounds. It will help if you have a partner that can help secure the unit to the bottom of the sink.

Install A Dishwasher

One of the challenges in installing a dishwasher is moving the unit in place. If you have an existing dishwasher, then it would be best to remove it first. Then, you can place your new dishwasher near the installation bay, make the water supply and electrical and draining hookups.

In a Nutshell

Since your bathroom is one of the most used rooms in your home, it makes sense to help it stay in good shape. It would be best to apply the tips above and consider routine maintenance. Moreover, if you have some bathroom plumbing troubles, don’t hesitate to contact plumbing experts and ask for help.